998 Kode Rahasia Samsung Galaxy S6 Edge SCV31 (AU) untuk Cek Software Hardware

Cara mengetahui samsung s6 edge asli– Mengecek software dan Hardware sebelum memutuskan membeli sebuah Hp, tentu perkara wajib. Namun, seringkali kita tidak tahu cara mengecek Hp Android asli atau KW. Nah, biasanya sih ada caranya. Cara rahasianya ini akan Mondo bagikan kepada kalian semua. Sebab, caranya pakai kode.

Kamu pernah mengecek Imei pada Hp? Dulu, ketika zaman Nokia 3315 series, umum banget yang namanya cek Imei dan lainnya. Sekarang juga bisa kok. Masih sama, pakai kode. Hanya saja, sekarang bukan cuma Imei, namun juga lainnya bisa dicek pakai kode. Makanya, koleksi kode rahasia Hp Android akan Mondo berikan kepada kalian semua. Mari kita cek.

Kode Rahasia Hp Android Samsung

Type *#06#> Untuk membuka Imei

Enter the service menu on newer phones like Galaxy S III
Type *#0*#

Show Software Version.
Use this to Show Software Version of your handset.
Type *#9999#

Show Software Version (instructions).
Type *#0837#

Show Serial Parameters.
Use this to the Show Serial Parameters of your handset.
Type *#0001#

Activates the smiley when charging.
Type *#9125#

LCD Contrast.
Type *#0523#

Battery status (capacity, voltage, temperature).
Type *#9998*228#

Program status.
Type *#9998*246#

Change Alarm Buzzer Frequency.
Type *#9998*289#

Debug Screens.
Type *#9998*324#

Watchdog.
Type *#9998*364#

EEPROM Error StackEEPROM
Type *#9998*377#

Trace Watchdog.
Type *#9998*427#

Change LCD contrast.
Type *#9998*523#

Jig detect.
Type *#9998*544#

Memory status.
Type *#9998*636#

SIM File Size.
Type *#9998*746#

SIM Service Table.
Type *#9998*778#

Type *#9998*785#

Run, Last UP, Last DOWN.
Type *#9998*786#

Software Version.
Type *#9998*837#

Test Vibrator – Flash the screen light during 10 sec and vibration activated.
Type *#9998*842#

Vocoder Reg – Normal, Earphone or Carkit.
Type *#9998*862#

Diag.
Type *#9998*872#

Reset On Fatal Error.
Type *#9998*947#

Last/Chk.
Type *#9998*999#

Yann debug screen (Debug Screens).
Type *#9998*9266#

Software version.
Type *#9998*9999#

Changes serial parameters (s=?, f=0.1, t=0.1).
Type *0001*s*f*t#

ANDROID secret codes
*#06# –

*#*#273282*255*663282*#*#* – Immediate backup of all media files

*#*#4636#*#* untuk menunjukkan 4 jenis cek.

* Phone information
* Battery information
* Battery history
* Usage statistics

*#*#7780#*#*

Kode di atas untuk reset atau remove Google Account. Selengkapnya di bawah ini

* Google account settings stored in your phone
* System and application data and settings
* Downloaded applications

It’ll NOT remove:

* Current system software and bundled applications
* SD card files e.g. photos, music files, etc.

*2767*3855# – Menghapus memori Hp

*#*#34971539#*#* – Kamera Hp. Ada 4 menu:
* Update camera firmware in image (Don’t try this option)
* Update camera firmware in SD card
* Get camera firmware version in Samsung Galaxy S6 Edge SCV31
* Get firmware update count

 

*#*#7594#*#*

Mengubah “End Call / Power” button.

*#*#225#*#* – Events calendar.

*#*#426#*#* – Debug information for Google Play service.

*#*#759#*#* – Access Google Partner setup (Rlz debug interface).

*#872564# – USB logging control

*#9900# – System dump mode Samsung Galaxy S6 Edge SCV31

*#*#97#*#* – Language and Keyboard settings in Samsung Galaxy S6 Edge SCV31

*#*#46*#*# – Reset Sim in Samsung Galaxy S6 Edge SCV31

*#301279# – HSDPAHSDPA

*#7465625# – View phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

*#*#273283*255*663282*#*#* – This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

*#*#197328640#*#* – This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

WLAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test (Use “Menu” button to start various tests)

*#*#232338#*#* РShows WiFi MAC address MAC (Media Access Control), address is a globally unique identifier assigned to network devices, and therefore it is often referred to as hardware or physical address. MAC addresses are 6-byte (48-bits) in length, and are written in MM:MM:MM:SS:SS:SS format. The first 3-bytes are ID number of the manufacturer, which is assigned by an Internet standards body. The second 3-bytes are serial number assigned by the manufacturer.

*#*#1472365#*#* РGPSThe Global Positioning System (GPS) is a satellite-based radio navigation system developed and operated by the U.S. Department of Defense. GPS permits land, sea, and airborne users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world. test

*#*#1575#*#* – For a more advanced GPS test

*#*#232331#*#* – Bluetooth test

*#*#232337#*# – Shows Bluetooth device address in Samsung Galaxy S6 Edge SCV31

*#*#8255#*#* – This code can be used to launch GTalk Service Monitor.

*#*#36245#*#* – Access email debug information.

Codes to get Firmware version information:

*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate

*#*#1234#*#* OR *#1234# – PDA and Phone firmware information

*#*#1111#*#* – FTA SW Version (1234 in the same code will give PDA and firmware version)

*#12580*369# – Software and hardware info

*#9090# – Diagnostic configuration in Samsung Galaxy S6 Edge SCV31

*#*#2222#*#* – FTA HW Version

Codes to launch various Factory Tests:

*#*#0283#*#* – Packet Loopback

*#*#0*#*#* – LCD display test

*#*#0673#*#* OR *#*#0289#*#* – Melody test

*#*#0842#*#* – Device test (Vibration test and BackLight test)

*#*#2663#*#* – Touch screen version Samsung Galaxy S6 Edge SCV31

*#*#2664#*#* – Touch screen test

*#*#0588#*#* – Proximity sensor test

*#*#3264#*#* – RAM version Samsung Galaxy S6 Edge SCV31

GSM codes for Samsung Galaxy S6 Edge SCV31

Change PIN Change the PIN code
Change PIN2 – ** 042 *, then enter the old The PIN2, and twice the new PIN2.
Unlock SIM-card (PIN) – ** 05 * then enter the PUK and new PIN twice
Unlock SIM-card (PIN2) – ** 052 *, then enter the PUK2 and new PIN2 twice

Call Forwarding (you have to order the service from the operator)
##002# – Cancel all diverts
##004# – Cancel all conditional call forwarding
**004* phone number # – Activate all conditional call forwarding

Unconditional call forwarding (Call Forward All)
###21 – Switch off and deactivate
#21# – Deactivate
**21*phone number# – Enable and Activate
*21# – Activate
*#21# – Check the condition

Diversion in case of “no answer”
###61 – Switch off and deactivate
#61# – Deactivate
**61* phone number# – Enable and Activate
*61# – Activate
*#61# – Check the condition

Setting the call time until the call forwarding option “no answer”
Example: – ** 61 * + ** 709576617601234 # 30 – set the waiting time of 30 seconds
Set timeout – ** 61 * Phone Number ** N #, N = 5..30 (seconds)
Remove the previous installation – ## 61 #

Diversion in case of “not available”
# ## 62 – Switch off and deactivate
# 62 # – Deactivate
** 62 *phone number# – Enable and Activate
* 62 # – Activate
* # 62 # – Check the condition

Diversion in case of “busy”
###67 – Switch off and deactivate
#67# – Deactivate
**67*phone number# – Enable and Activate
*67# – Activate
*#67# – Check the condition

Call Barring (you have to order the service from the operator)
Change the password for all bans (default – 0000)
– ** 03 * 330 * old password * new password * new password #

Barring of all outgoing calls
**33*password# – Activate
#33*password# – Deactivate
*#33# – Check the condition

Barring of all calls
**330*password# – Activate
#330*password# – Deactivate
*#330# – Check the condition

Barring of all outgoing international calls
**331*password# – Activate
#331*password# – Deactivate
*#331# – Check the condition

Barring of all outgoing calls
**333*password# – Activate
#333*password# – Deactivate
*#333# – Check the condition

Barring of all incoming calls
**353*password# – Activate
#353*password# – Deactivate
*#353# – Check the condition

Barring all incoming calls when roaming
**351*password# – Activate
#351*password# – Deactivate
*#351# – Check the condition

Call waiting (you have to order the service from the operator)
*43# – Activate
#43# – Deactivate
*#43# – Check the condition

Transfer your phone number (Anti ANI)
#30#phone number – Block
*30#phone number – Allow
*#30# – Check the condition

Show phone number of the caller you (ANI)
#77# – Block
*77# – Allow
*#77# – Check the condition

Smart menu
GP – *111#
Rob – *140#
Banglalink – *789#


Loading...